What kind of car is a Mazda Protege?

I drive a 2002 Mazda Protege and it’s been great to me until this past weekend. I had a 4.5-5 hour trip ahead of me and Google Maps told me a more direct route (i.e. not using the interstates) would save time. It must have erroneously assumed that the highway comprising basically the entire trip would be speed limit 55-65 the entire way.

What does it mean when your Mazda Protege overheats?

With the hood up and an ear to the engine, it sounds like a piece of plastic fluttering in the wind, but with a faint electric “crackling” quality. Soon thereafter the check-engine light illuminates. Before long the engine overheats and I pull over to the side of the road.

Why is the thermostat on my Mazda Protege stuck?

Thermostat being stuck would not let coolant recovery from the catch can, sounds like bad radiator and head gasket. MANY if not all vehicles today need to have the cooling system BURPED of ANY AND ALL AIR before you go back on the road. You can start at a thermostat replacement which is easy to do and inexpensive.

95 mazda protege 1.5 (1)idles rough;idle sometimes keep time with the indicator if in use. (2) headlights go off then come on again sometimes when i use the indicator -mostly left turn, sometimes right. any suggestions before i have to go to the dealer? chaching $$$; do i have to?

How many miles does a 2000 protege have?

I bought a 2000 protege (auto) and has only 34 K miles. It runs fine but when I stop on a traffic light or the car is stationary it makes an audible rattling sound. This sound is not their when I am not stationary.

What causes a car to stop while driving?

The crankshaft sensor is a necessary part to make your car engine running on a lot of car models. On some car models, you do also have a camshaft position sensor, which the car uses if the camshaft sensor is faulty. In this case, a faulty crankshaft position sensor may not cause the car to stop entirely.

How to fix a Mazda that stalls at stop?

Remove the air hose from the throttle body. Disconnect the throttle body connector. Remove the throttle body from the intake manifold, with the water hose connected. Clean the throttle body on the air hose side using a soft, clean shop cloth, sprayed with engine cleaner (Mazda recommends their P/N 000-77-A86).

Is the 2002 Mazda Protege a Ford Focus?

Each 2002 vehicle benefits from a reinforced body/chassis structure, and a new modular audio system with a standard CD player is installed in all sedans. A redesign isnt likely until 2004, but when it does occur, the Ford Focus platform may possibly be used. Ford owns a controlling interest in Mazda.

How big is the trunk of a Mazda proteg?

As a result of what Mazda calls OptiSpace design, the Proteg� can actually accommodate the five passengers that it claims to hold. Interior volume amounts to 92.6 cubic feet, and it has adequate rear legroom and headroom for adult passengers. A split, folding rear seat supplements the 13.2-cubic-foot trunk space.

Bought new in 2001, a protégé es in millennium red. It was fun to drive and decent on gas. However, the salt of Central NY winters dissolved the car by rust. Oil pan rusted through and had to be replaced.

Where can I buy a Mazda protege5 ignition coil?

When I installed these uxcell Set of 2 Ignition Coil for 2001-2003 Mazda Proteg 2002-2003 Mazda Protege5 L4 2.0L FP85-18-100C https://www.amazon.com/dp/B06XK6HN5H?ref=yo_pop_ma_swf the problem was absolutely fixed. I bought this to try and fix a P0200 code my Mazda Protege5 (2003) was showing.

How big is the trunk of a Ford protege?

The five-passenger Protegé is one of the roomier small cars, with an interior volume of 92.6 cubic feet. This translates into adequate rear legroom and headroom for adult passengers. A split folding rear seat supplements the 12.9-cubic foot trunk, giving the Protegé commendable cargo space for a small sedan.

https://www.youtube.com/watch?v=XUdNnFaTFc4

When did Mazda stop making the Mazda Familia?

Mazda Familia. The Mazda Familia, also marketed prominently as the Mazda 323 and Mazda Protegé, is a small family car that was manufactured by Mazda between 1963 and 2003. The Familia line was replaced by the Mazda3/Axela for 2004. It was marketed as the Familia in Japan.

What kind of power does a Mazda Familia have?

Power outputs (SAE gross) in Japan of the facelifted, overhead-cam-engined versions were 62 and 75 PS (46 and 55 kW) respectively. The Van (wagon) model was available with either three or five doors, although most export markets only received the five-door version.

When did the Mazda Protege Sport Wagon come out?

Now, Mazda is helping to revive the small hatchback body style with its new Proteg�5 sport wagon, launched as an early 2002 model. During the 2001 model year, Mazda introduced another variant of the Proteg�, dubbed MP3 to denote its Kenwood audio system.

What kind of engine does a Mazda Protege have?

Except for the MP3, all models now use a 130-hp, 2.0-liter four-cylinder engine designed by Mazda. The 1.6-liter engine, previously standard on the DX sedan, has been dropped. Each 2002 vehicle benefits from a reinforced body/chassis structure, and a new modular audio system with a standard CD player is installed in all sedans.

Is the Mazda proteg a roomy small car?

MP3 models are finished in Laser Blue or Vivid Yellow. This is one of the roomier small cars on the market. As a result of what Mazda calls OptiSpace design, the Proteg� can actually accommodate the five passengers that it claims to hold.

Why does my Mazda fuel gauge show Empty?

At this point your in-dash gauge would theoretically show Empty. This is the reverse side of the sender. The whole mechanism floats on a spring. I assume this is to compensate for over filling and intense jars the sensor may be subjected to on rough roads.

How much refrigerant is in a Mazda 3?

A/C Mazda refrigerant filling quantities R134a an 1234yf. Mazda refrigerant filling quantities R134a an 1234yf. Mazda refrigerant filling quantities R134a an 1234yf. A/C Mazda refrigerant filling quantities R134a an 1234yf.

At 174 inches end to end, Protegé is one inch shorter than the best-selling small car, the Honda Civic. Mazda says the “European-inspired styling” was done jointly by designers in Europe, Japan and California. The DX and LX models use a 105-horsepower, 1.6-liter four-cylinder engine. The top-line ES has a 1.8-liter engine with 122 horsepower.

Is the Mazda Protege going to be a focus?

Protegé was redesigned last year, but it has a short future in its present form. Ford owns a controlling interest in Mazda, and plans are to switch the Protegé to the Ford Focus platform for 2002. However, Mazda’s rendition is expected to look much different than Ford’s.

How big is the trunk of a Mazda Protege?

The five-passenger Protegé is one of the roomier small cars, with interior volume of 92.6 cubic feet. That translates into adequate rear legroom and headroom for adult-size passengers. A split, folding rear seat supplements the 12.9-cubic-foot trunk, giving Protegé commendable cargo space for a small sedan.

Are there side impact airbags on the Mazda Protege?

Side-impact airbags are a new option for the LX and ES versions of the Protegé, Mazda’s front-drive compact sedan. The new side-impact airbags are part of option packages that include anti-lock brakes. Protegé was redesigned last year, but it has a short future in its present form.

Why is my air conditioner not working in my Mazda 6?

If the controls do not work correctly then the problem is probably with the control panel. If you cannot hear the sound that accompanies turning the air from low to high then the problem is likely with the blower motor. Get into the fuse box in a Mazda 6 from the interior of the car.

What kind of clips do you use on a Mazda?

Pick up some of our Mazda trim panel clips, and you won’t have to worry about missing and damaged pieces when you remove interior parts. We also carry replacements for Mazda plastic clips and nylon nuts used to keep wiring and other components in place beneath the bodywork.

What kind of fasteners do I need for a Mazda?

We have the Mazda clips and fasteners you need for repairs inside, outside and under the hood. That includes Mazda fender liner clips and OEM-style Mazda auto body clips. Pick up some of our Mazda trim panel clips, and you won’t have to worry about missing and damaged pieces when you remove interior parts.

https://www.youtube.com/watch?v=dC1R1lb0m5k

What should I do if my idle control motor is disconnected?

The engine should still start and run without any issue despite the idle control motor being disconnected. Be sure to tuck the wiring you disconnected up in the engine bay so it doesn’t get caught in any moving parts. Look for a difference in idle speed.

What does it mean when idle control does not increase?

If the engine idle does not increase, it means there is an issue at the idle control motor of its circuit preventing the signal from changing the idle. You can purchase a bidirectional scan tool at your local auto parts store. Make sure the wiring harness is firmly connected to the idle control motor before conducting this test.

Can a bad idle control valve cause stalling?

This is controlled by the engine’s computer. Sometimes parts go bad, which results in your car idling strangely or stalling. Check to see if your idle control valve is functioning properly before attempting to replace it. Look for a high engine idle. A common symptom of a faulty idle control valve can be a high idle.

How to remove the cylinder switch from a Mazda Protege?

ECT sensor signal characteristic (reference) Circuit Open/Short Inspection fPage 210 Door Lock Cylinder Switch: Service and Repair DOOR KEY CYLINDER SWITCH REMOVAL/INSTALLATION 1. Close the door glass completely. 2. Disconnect the negative battery cable. 3. Remove the passenger-side front door trim.

How do you check the PCM on a Mazda Protege?

PCM Inspection Using the SST (104 Pin Breakout Box) 1. Disconnect the negative battery cable. 2. Disconnect the PCM connector. 3. Connect the SST (104 Pin Breakout Box) to the PCM as shown. 4. Tighten the connector bolt. Tightening torque 7.9 – 10.7 N.m {80 – 110 kgf.m, 69.5 – 95.4 in.lbf} 5. Connect the negative battery cable.

What kind of inspection should I do on my Mazda Protege?

Always carry out a total inspection of the Input systems, output systems, and PCM to determine the cause of trouble. Otherwise, a wrong diagnosis will be made. PCM Inspection Using the SST (104 Pin Breakout Box) 1.

When did the Mazda Protege repair manual come out?

We’ve checked the years that the manuals cover and we have Mazda Protege repair manuals for the following years; 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 1999, 2000, 2001, 2002 and 2003. Go through the 48 different PDF’s that are displayed below, for example this one.

Can a Mazda Apexi s-AFC work on a protege?

APEXi S-AFC. These systems will not work effectively due to Mazda’s ECU designs. At normal partial throttle operations, the AFC units will successfully fool the ECU to supply a different air/fuel mixture. However, data is sent. For 3rd generation Protegé’s, piggy back systems designed specifically

Can You retune a 3rd generation protege engine?

For 3rd generation Protegé’s, piggy back systems designed specifically Power SMT6 rebrand) are able to effectively retune the engine to an extent. Some controls can still not be completely overriden by these piggy back controllers. The Haltech, MegaSquirt, or SDS.

What’s the lift on a protege ZL-VE?

A TSB was issued in Japan concerning stalling/idling issues under cold reduced slightly in order to decrease overlap from 17.5° to 10.5°. lift of .341 and a duration of 198° @.050. lift of .322 and a duration of 200° @.050. Cam gears from Tripoint Racing are also available. exhaust cam from the 1.5l ZL-VE engine.

Why does my Mazda car battery keep draining?

You have some other problems like bad battery or some short.. Saint’s right, that 2-3 watt security light shouldn’t be killing a battery. Your car has a drain somewhere in the system.

Navigation