What to do if you get a p2757 code?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P2757 code is 1.0 hour of labor.
What is the problem code for Lexus check engine light?
P1150Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction (Bank 2 Sensor 1) – Read Our Article On Oxygen Sensor CodesFor Help With This Lexus Trouble Code P1153Air/Fuel Ratio Sensor Circuit Response Malfunction (Bank 2 Sensor 1)
How can I erase the trouble code on my GS300?
After the faults have been rectified, trouble codes can be erased by using a Scan Tool connected to the data link connector (DLC) or as follows: Ensure ignition switched OFF. Disconnect battery ground lead for 60 seconds minimum. Reconnect battery ground lead.
Where to find OBD1 code on Lexus SC300?
Transmission must be in Neutral position. All accessories must be turned Off. On pre-OBD II models, turn ignition to On, then use a jumper wire to connect terminals TE1 and El of the data link connector, located under the left hand side of the instrument panel. Codes are indicated by the number of flashes of the check engine warning light.
P1150Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction (Bank 2 Sensor 1) – Read Our Article On Oxygen Sensor CodesFor Help With This Lexus Trouble Code P1153Air/Fuel Ratio Sensor Circuit Response Malfunction (Bank 2 Sensor 1)
After the faults have been rectified, trouble codes can be erased by using a Scan Tool connected to the data link connector (DLC) or as follows: Ensure ignition switched OFF. Disconnect battery ground lead for 60 seconds minimum. Reconnect battery ground lead.
Transmission must be in Neutral position. All accessories must be turned Off. On pre-OBD II models, turn ignition to On, then use a jumper wire to connect terminals TE1 and El of the data link connector, located under the left hand side of the instrument panel. Codes are indicated by the number of flashes of the check engine warning light.