How do you get a rear door latch back in place?
You can now bolt the latch back into place with the 3 Torx T30 screws. Feed the internal handle cable back through its hole and push the grommet into place in the door panel (yellow arrow). Connect the latch harness connector and push the grommet back into place in the door panel (dark pink arrow).
What’s the best way to replace a door?
Unbolt each bolt one at a time (do not remove all of the bolts at once). Paint a thin film of thread locker onto the bolt thread. Re-position the bolt and tighten it down. Repeat this process with each bolt that you had to remove during the door replacement.
How do you remove a car door holder?
Unbolt the door holder from the body of the car. Note: In some vehicles the door holder is an integrated piece on one or both of the door hinges. If you find this is the case, skip to the next step. Unbolt the hinges. Unbolt the hinges from the door. Remove the door. With the bolts removed, the door should basically fall away from the car body.
How can I adjust the fit of my car door?
Adjust door fit: Hinge bolts are the only way to adjust the door fit without serious body work. Loosen the door hinge bolts slightly, just enough to shift the door, try to move the door in the hinge bolt holes. (Not every car will be able to move the door within the bolt holes.
How can I access the rear door handle?
Either removing or unbolting the door latch will allow access to the rear door handle mounting Bolt. Pulling off the “Child Lock Switch” rubber cover provides one path. You can access the front bolt through one of the door’s access holes. The interior of the old door handle has a lip that holds the handle to the door.
What can I use to replace the armrest on my door?
Replace your worn-out door panel armrest with this quality product from Coverlay. Manufactured from top-notch materials, this replacement door panel armrest ensures the ultimate in quality and value. Armrest Pads by OER®.
How to replace rear door panel Ford Ranger extended cab?
1A Auto shows you how to repair, install, fix, change or replace a rear door panel. This video is applicable to the 01 Ford Ranger While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content.
Do you need to remove the cluster from a door lock?
Lift the whole panel straight up to clear it of the catch behind the door handle. Note: If your vehicle has electronic door locks, you will need to remove the door lock cluster panel from the door panel. Before removing the door panel, remove the screws attaching the cluster to the panel.