What causes a transmission temperature Code of p0711?
Several problems may cause a P0711 code including: Low transmission fluid (due to a leak) Dirty or contaminated transmission fluid. May experience a slipping transmission. Damaged or defective transmission temperature sensor. Engine may overheat. Damaged or defective ECM/PCM.
How to know if your Kia has a p0711 code?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0711 KIA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
What is the severity of the p0713 code?
P0713 Transmission Fluid Temperature Sensor A Circuit High Input P0714 Transmission Fluid Temperature Sensor A Circuit Intermittent The severity of this code is moderate to severe. In some cases, this code can indicate a transmission problem.
When to use the p0711 sensor intermittent circuit intermittent?
Sensor “B” Circuit Intermittent A code P0711 will be stored when the ECM/PCM has found a problem with the transmission temperature. If the transmission temperature rises above a preset temperature (refer to your vehicle’s service manual for specifics to your make and model), a code can be stored.
Several problems may cause a P0711 code including: Low transmission fluid (due to a leak) Dirty or contaminated transmission fluid. May experience a slipping transmission. Damaged or defective transmission temperature sensor. Engine may overheat. Damaged or defective ECM/PCM.
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0711 KIA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
P0713 Transmission Fluid Temperature Sensor A Circuit High Input P0714 Transmission Fluid Temperature Sensor A Circuit Intermittent The severity of this code is moderate to severe. In some cases, this code can indicate a transmission problem.
Sensor “B” Circuit Intermittent A code P0711 will be stored when the ECM/PCM has found a problem with the transmission temperature. If the transmission temperature rises above a preset temperature (refer to your vehicle’s service manual for specifics to your make and model), a code can be stored.
What is the diagnostic code for transmission fluid temperature?
P0711 is a diagnostic trouble code (DTC) for “Transmission Fluid Temperature Sensor Circuit Range/Performance”.
What kind of sensor is used to check transmission temperature?
The sensor is typically a two-wire variable-resistance type sensor, with a voltage wire and ground wire. The reference voltage helps the ECM/PCM monitor the transmission’s temperature. If the transmission temperature is too high, or too low, a code will be stored.
https://www.youtube.com/watch?v=Nkvyh4bWEVk