How do you remove tension from timing belt?
The easiest method on removing bolt tension is with a ¼” 10mm socket attached to an extension and a ¼” ratchet wrench. While hold the pulley with the right hand, apply torque to the ratchet wrench to remove the bolts.
How to replace timing belt on Kia Sephia?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: PzeT9AIesMIdsQ6e)
How do you replace the timing belt on a Hyundai Elantra?
Remove the Timing Belt and Pulleys Unbolt and remove the Timing Belt Tension Pulley (left side of the engine). Using a box wrench, slightly move clockwise (1 degree) the Camshaft Pulley and remove the belt. This slight advance in the camshaft will allow some belt slack to ease new belt installation.
Can a timing belt be replaced with a water pump?
Gates makes an acceptable Timing Belt Component Kit (belt, two pulleys, and water pump). Since the water pump is not driven by the timing belt, you do not save much time or cost by replacing the pump along with the timing belt.
The easiest method on removing bolt tension is with a ¼” 10mm socket attached to an extension and a ¼” ratchet wrench. While hold the pulley with the right hand, apply torque to the ratchet wrench to remove the bolts.
Remove the Timing Belt and Pulleys Unbolt and remove the Timing Belt Tension Pulley (left side of the engine). Using a box wrench, slightly move clockwise (1 degree) the Camshaft Pulley and remove the belt. This slight advance in the camshaft will allow some belt slack to ease new belt installation.
How big is the tensioner pulley on a Kia GL1000?
The T42015 is a near exact fit to the OEM tensioner pulley. In particular the OEM bearing is 60mm outside diameter and the T42015 is 60mm, the OEM width is 29mm and the T42015 is 30mm. This bearing is used in late model KIA and Hyundai applications from 1997 through 2008 for the 1.8L (and maybe others) engines.
How do you remove the power steering belt?
Turn the Power Steering Belt Tension Adjustment Bolt counter-clockwise to relieve the belt tension then remove the belt. From inside the passenger side wheel well, loosen the A/C pulley nut.