Are all VVT solenoids the same?
All four variable valve timing solenoids/actuators are the same.
How to remove the CVVT from a Kia Sedona?
1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the intake manifold. 3. Disconnect the CVVT oil control valve connector (A). 4. Remove the installation bolt (B), and then remove the valve from the engine. 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2.
How to install an oil control valve on a Kia Sedona?
Accurately distinguish the color of the valve and harness connectors in bank 1 and 2 when installing, otherwise the engine will operate abnormally (Refer to the table below). 1. Install in the reverse order of removal.
What are the components of a Kia Sedona?
1. Engine Control Module (ECM) 2. Barometric Pressure Sensor (BPS) 3. Manifold Absolute Pressure Sensor (MAPS) 4. Intake Air Temperature Sensor (IATS) 5. Engine Coolant Temperature Sensor (ECTS) 6. Throttle Position Sensor (TPS) [integrated into ETC Module] 7. Crankshaft Position Sensor (CKPS) 8. Camshaft Position Sensor (CMPS) [Bank 1 / Intake]
1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the intake manifold. 3. Disconnect the CVVT oil control valve connector (A). 4. Remove the installation bolt (B), and then remove the valve from the engine. 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2.
Accurately distinguish the color of the valve and harness connectors in bank 1 and 2 when installing, otherwise the engine will operate abnormally (Refer to the table below). 1. Install in the reverse order of removal.
When to replace the CVVT on a Kia?
If, at any time, the OCV is suspected as a cause of rough idling, poor acceleration, camshaft timing misalignment-related trouble codes, misfire-related trouble codes, etc., on a Kia vehicle equipped with a CVVT system, be sure to perform the OCV inspection procedure below before replacement. Copyright © 2021 Babcox Media Inc. All Rights Reserved.
1. Engine Control Module (ECM) 2. Barometric Pressure Sensor (BPS) 3. Manifold Absolute Pressure Sensor (MAPS) 4. Intake Air Temperature Sensor (IATS) 5. Engine Coolant Temperature Sensor (ECTS) 6. Throttle Position Sensor (TPS) [integrated into ETC Module] 7. Crankshaft Position Sensor (CKPS) 8. Camshaft Position Sensor (CMPS) [Bank 1 / Intake]