What should I do about my Kia Sedona brake system?
Replace the boots and seals with new ones whenever the brake caliper is disassembled. Do not reuse the drained fluid. Always use genuine DOT3/DOT4 brake Fluid. Using a non-genuine DOT3/DOT4 brake fluid can cause corrosion and decrease the life of the system. Make sure that no dirt or other foreign matter is allowed to contaminate the brake fluid.
What should I know about Kia Rio brake pads?
Be sure to check out the follow up to this video…http://www.youtube.com/watch?v=wOz2j-3nYb8IMPORTANT…READ FULL DESCRIPTION BEFORE ATTEMPTING!!!This short… AboutPressCopyrightContact usCreatorsAdvertiseDevelopersTermsPrivacyPolicy & SafetyHow YouTube worksTest new features
What to do if your Hyundai Sonata brakes don’t work?
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. I will explain how to accurately diagnosis and repair today’s complicated automobiles.
What to do if your Kia Rio is leaking brake fluid?
Bleed the brakes well (use lots of new brake fluid) so that there is no old fluid left in the system. After you are sure you have all the old brake fluid, air and trash out of the system you take the drums and bearings back off and inspect. Check to make sure the brake adjuster adjusted and that the hydraulic cylinders are not leaking brake fluid.
Replace the boots and seals with new ones whenever the brake caliper is disassembled. Do not reuse the drained fluid. Always use genuine DOT3/DOT4 brake Fluid. Using a non-genuine DOT3/DOT4 brake fluid can cause corrosion and decrease the life of the system. Make sure that no dirt or other foreign matter is allowed to contaminate the brake fluid.
What do you need to know about the brake master cylinder?
Average rating from 206 customers who received a Brake System Inspection. The brake master cylinder is one of the most important components found in modern car braking systems. It serves as the main valve that pushes brake fluid through the brake lines so the brake calipers can squeeze the pads against the rotors.
Is the master cylinder still bleeding after replacing?
I HAVE TRIED TO BLEED IT OUT ALL DAY, I HAVE USED MY SNAP ON SCAN TOOL, STILL BLEEDING AND DRIVING, BLEEDING AND DRIVING, ANY HELP WOULD BE APPRECIATED. reading your comments I was able to find an issue on one of the calipers after replacing the master cylinder twice and after bleeding the system several times, thanks!
Can You Bleed the brakes on a car?
YES, I DID, AND I’M AN AUTO TECH, I BLED THE BRAKES IN THE SEQUENCE THAT IT SAYS TO DO IT IN, RR, LF, LR, RF, BUT CAN NOT GET THE REAR BRAKES TO BLEED OUT. now try the brake,full pedal? Do this on every line until you find your problem area
How to remove the ECM from a Kia Sedona?
1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the battery. 3. Remove the air cleaner assembly and intake air hose. 4. 5. Remove the ECM bracket assembly (B) after loosening the mounting bolts and nuts. 6. After removing the mounting nuts (A), remove the ECM from the bracket. 1.
How do you replace a headlight on a Kia Sedona?
Step 1 Determine which headlight needs replacing, and then locate the three bolts that are holding the headlight to the frame of your Kia Sedona. Remove the three bolts with a 10mm socket wrench and set the bolts aside. Locate the keeper pins in the back of the headlight assembly that are holding the headlight to the car frame.
Where are the speed sensors on my Kia Sedona?
Recently I was in need of some direction on how to replace the Input and Output speed sensors on my 2005 Kia Sedona. After a significant time scouring the internet I was only able to come up with the information that they were both on the transmission. Well Duh of course they. Taking the approximate location from what I could find I went to it.
Where is the brake light switch on a Kia Sorento?
Ok, now we’ve confirmed that there is power going to the brake light circuit, it’s time to figure out where in the path from the fuse box to the brake lights the power is lost. The most common location is the brake light switch . The good news is they are inexpensive and easy to replace. Your Sorento’s brake light switch is under the brake pedal.
Why are the brake lights not working on my Kia Forte?
The recall sates that the break lights may not work or stay illuminated when the brake pedal is depressed. Usually the light telling you traction traction control is off will be on as well. It could be related to the brake switch recall.
What to do if your brake lights are not working?
If none of the brake lights are working, we are going to follow the circuit from the fuse box back to the brake pedal. At some point the power is not getting from point A to point B. We just have to find where that is. Please note that tail lights can work even if the brake lights are burned out.
What are the brake lights on a Kia Sedona?
Kia Sedona: My brake lights and license plate lights do not… My brake lights and license… My brake lights and license plate lights do not work. The tail lights, blinkers and back up lights do work. All fuses are good. Any ideas? We need to access the rear area module RAM. See below.
The recall sates that the break lights may not work or stay illuminated when the brake pedal is depressed. Usually the light telling you traction traction control is off will be on as well. It could be related to the brake switch recall.
What makes a Kia Sedona a bad car?
If 35 and 37 are good and 16 is dead then the RAM is bad. If 21 is good and 33, 43, 14 are dead then the RAM is bad. Hello again Chris here. I am just checking in with you to see if you still need help with the concern we worked on, and if not to say Thanks.
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
What to do when your brake pedal is near the floor?
At this time air can be pulled into the system in small quantities which causes the brake pedal to be near the floor. Bleed the brake system while checking for air in the form of bubbles being released from the bleeder screws and replace the brake components which air is observed from.
What causes a brake caliper to go to the floor?
If the backside of the tire is wet with fluid either you have a brake caliper that is leaking and must be replaced or a wheel cylinder that has gone bad and needs replacing. Both of these problems allow a fluid leak through their brake fluid seals.
How can I tell if my brake system is leaking?
Inspect for Brake System Leaks: Using a flashlight check the rear of the master cylinder where it bolts to the brake booster. If the master is leaking you will be able to see brake fluid dripping from the front of the brake booster and rear of the master. If a leak is observed the brake master cylinder must be replaced.