How do you put a Jeep Liberty transfer case in neutral?
Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case NEUTRAL (N) button (located above the selector switch) for four seconds, until the light behind the NEUTRAL (N) symbol starts to blink, indicating shift in progress.
How to put a Jeep Liberty in neutral?
It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL (N) before recreational towing to prevent damage to internal parts. 1. Bring the vehicle to a complete stop and shift the transmission to PARK. 2. Turn OFF the ignition. 3. Turn the ignition switch to the ON/RUN position, but do not start the engine.
Can a Jeep Patriot be flat towed behind a RV?
The 4-wheel drive trim levels of the Jeep Patriot can also be safely flat-towed behind a motorhome or RV. Just like the Gladiator, you need to make sure you are following all of the flat-towing specifications in the owner’s manual.
What does transfer case neutral ( N ) do?
The transfer case NEUTRAL (N) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move, even if the transmission is in PARK. The parking brake should always be applied when the driver is not in the vehicle. Use the following procedure to prepare your vehicle for recreational towing.
Can a Jeep Compass be flat towed behind an RV?
The Jeep Compass and the Jeep Renegade are two models that aren’t considered safe for flat towing behind an RV. This is due to specific drive train features such as front-wheel drive, full or part-time four-wheel-drive systems as well as electronic transmissions that don’t take well to the dynamic mechanical processes behind flat towing.
What does transfer case neutral do on Jeep Wrangler?
The transfer case NEUTRAL (N) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move despite the transmission position. The parking brake should always be applied with the driver is not in the vehicle.
It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL (N) before recreational towing to prevent damage to internal parts. 1. Bring the vehicle to a complete stop and shift the transmission to PARK. 2. Turn OFF the ignition. 3. Turn the ignition switch to the ON/RUN position, but do not start the engine.
How to flat tow a 4 wheel drive Jeep?
1 Start your Jeep 2 Shift the transmission into neutral or depress the clutch pedal and put the manual transmission into neutral. 3 Shift the transfer case lever into either 2 or 4 wheel drive. 4 Shift the transfer automatic transmission into Drive or move the manual transmission into gear and then release the clutch pedal.
How to tow a Jeep Wrangler Unlimited behind an RV?
How To Tow A Jeep Wrangler Unlimited Behind An RV. First, the transfer case must be shifted into NEUTRAL. Here’s how to do that: Key must be in the “accessory” position: Depress and hold the brake pedal. Set Parking Brake. Shift an automatic transmission into NEUTRAL (N) or depress clutch pedal on manual transmission.