What is Jeep Wrangler transfer case?
Power from the engine feeds the transmission, which controls the gears in the transfer case, which then rotates the rear drive shaft during normal operation. Within the transfer ​case there’s either a chain or several gears that control the rear drive shaft and the gearing for the front drive shaft.
What kind of transfer case does a Jeep Wrangler use?
The new TJ Wrangler continues to use the NP231, but the NP231 used in the TJ has a different tail housing that allows the removal of the drive shaft with out losing transfer case fluid. Both versions of the NP231 used in the Wranglers have an over all length that is long for a short wheel base vehicle.
What kind of lubricant is in a Jeep transfer case?
Drive Positions and Shift Controls: 2H, 4H, 4L and Neutral. Ranges selected via floor mounted shift lever. 4H and 4L ranges are undifferentiated. Case Configuration: One piece cast iron with aluminum front/rear bearing caps. Lubricant Capacity and Type: 4 pints (1.9 liters) SAE 85W-90 gear lubricant API grade GL-5.
Can a jeep transmission be transferred to a Dodge transmission?
You can typically bolt a Jeep unit to a Dodge transmission and vice versa, however Chevrolet units are NOT cross compatible: While GM uses the same 6 bolt patter, they have it rotate approximately 90 degrees from that used by jeep dodge.
When did GM start using the NP241 transfer case?
In 1988, GM began using the NP241 transfer cases. Most of these units will be right hand drop, but Chevy also used a few left hand drop applications. The Chevy NP241 is supplied with a 27 spline female input or a 32 spline female input.
Is there a 1992 Jeep Wrangler transfer case cover?
Many transfer panel covers were designed for a specific make and model, and a 1992 Jeep Wrangler transfer case cover won’t necessarily be the best housing for a 1990 Jeep Wrangler transfer case. Our associates at 4WD.com can help you find the best equipment for your Jeep so that you can get on the road (and off!) as smoothly as possible.
Where can I get a cheap transfer case for a jeep?
The output for the front driveshaft is on the drivers side. Low range is 2.72 and high is 1.00. If you own a 21 spline NP231 and you want to swap in a 23 spline transmission, you can either look for a cheap 23 spline NP231 at the junk yard or go to your local Jeep Parts Dealer and order up a new input shaft part #5300-6085.
How long is the warranty on a Jeep transfer case?
Transfer Case Assemblies are delivered with 12 month unlimited mile warranty, from time of purchase. When ordering please provide vehicle make, year, model,, transfer case model number and assembly numbers off existing transfer case tag, this information will ensure that you receive a direct drop in replacement.
Is the YJ Wrangler a 4 wheel drive vehicle?
Because four-wheel-drive vehicles need power in both the rear and front axles, it also moderates differences in rotation between the front and rear wheels. Two of the most essential parts are the YJ Transfer Case Yoke and the YJ Wrangler Transfer Case Output Shafts.