What makes a loud clunking noise when you drive over a pot hole?
When i drive over pot holes, uneven pavement i hear a loud clunking noise. It has gotten alot worse in the last 24 hours because i have been doing more driving than usual. My car has 244000 miles. My car has an automatic transmission. Unfortunately, as our vehicles age, the parts will just wear out.
Why is my CV joint making a clunking noise?
Once this happens, the grease comes out and moisture and dirt get in, causing the CV joint to wear faster and eventually fail due to lack of lubrication and corrosion.
Why does my car make a clunking noise when I hit a bump?
When the CV joint becomes damaged or worn, you may hear a clicking, clunking or popping sound coming from this area as the weight of the vehicle puts pressure on this area and shifts back and forth and side to side. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.
When i drive over pot holes, uneven pavement i hear a loud clunking noise. It has gotten alot worse in the last 24 hours because i have been doing more driving than usual. My car has 244000 miles. My car has an automatic transmission. Unfortunately, as our vehicles age, the parts will just wear out.
Why does my car make a clunking sound?
Due to the effort of going off-road, vehicles with leaf springs tend to break or bend causing a clunking sound. Usually the shackle on one end of a leaf spring bends or breaks creating a binding sound, which is a loud clunk. Vehicles with massive suspension lifts are in danger of leaf spring shackles failing.
Why do I hear a clunk when I hit a bump?
If you hear a clunk when the suspension works over bumps, you may have excessive clearance in a joint due to wear. It might be as simple as a loose nut on the strut, or something more subtle such as a shrunken, dried-out rubber bushing.
Once this happens, the grease comes out and moisture and dirt get in, causing the CV joint to wear faster and eventually fail due to lack of lubrication and corrosion.
Why does my strut make a clunking noise?
Internal shock or strut noise is uncommon. The most common cause for clunking noises over bumps is the mounts or attaching parts. Careful inspection is often required to identify the cause.
Why is my Vibe making a knocking noise?
The Vibe has a problem with the front suspension anyway and striking a pothole may have damaged it to a point where it may need to be replaced. The alignment job was a “patch” job in my opinion. If the pothole bent a control arm and/or damaged a control arm bushing, that’s another possible source of the noise and alignment problem.
Why do my front struts make a clunking noise?
Replaced front struts, now a new creaking noise… Like the title says, I recently replaced the struts in my 02 with 65k miles on it. I heard a clunking noise in the front over bumps, so I replaced the struts. Now, it seems like there is a “creaking” noise whenever I go over a small bump in the road (the original nosie is gone).
Internal shock or strut noise is uncommon. The most common cause for clunking noises over bumps is the mounts or attaching parts. Careful inspection is often required to identify the cause. Mountings and bushings can appear to be tight, but move slightly when driving.
The Vibe has a problem with the front suspension anyway and striking a pothole may have damaged it to a point where it may need to be replaced. The alignment job was a “patch” job in my opinion. If the pothole bent a control arm and/or damaged a control arm bushing, that’s another possible source of the noise and alignment problem.
What happens if you hit a pothole at excessive speed?
The slower you hit a pothole, the further your wheel will sink into the hole before hitting the other side. That said, hitting a pothole at excessive speeds an be dangerous if it causes you to lose control of the vehicle. Three common issues cause by potholes include:
When the CV joint becomes damaged or worn, you may hear a clicking, clunking or popping sound coming from this area as the weight of the vehicle puts pressure on this area and shifts back and forth and side to side. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.
How to troubleshoot a clicking or popping sound in car?
Turn the wheels from lock to lock going from right to left. This will check to see if the bearing plates will make a clicking or popping noise while the vehicle is stationary. Step 3: Drive the vehicle around the block. Make turns where you can turn the steering wheel all the way in a direction.
What should I do if my air compressor is not working?
Parts are readily available for most compressors, and with some basic air compressor motor troubleshooting, you should be able to nail down what’s wrong on your own. Is your air compressor not functioning as expected?
What makes a clunking noise when going over a bump?
If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged. The bushings are designed to dampen any noise that might be created when your vehicle goes over a bump.
Is it normal for an air conditioner to make a pulsating noise?
An air conditioner making a pulsating noise isn’t necessarily a bad sign — a little pulsing noise can be perfectly normal when the air conditioner is operating.
Why does my car make a hard thumping noise when turning?
Noises Over Bumps and While Turning. Actual suspension problems will manifest when the suspension suddenly has to move, either because of a bump or because the weight of the vehicle shifts onto that side while cornering. The classic symptom of bad ball joints is a hard thumping over bumps, and while entering a corner.