Why is the ignition key stuck in my Grand Cherokee?

Why is the ignition key stuck in my Grand Cherokee?

Brilliant post, Milo, very useful. I have a 2003 Grand Cherokee Overland 2.7 CRD, which I love, and earlier today the ignition key would not come out of the ignition. My first thought was the ignition lock itself, so I spent some time jiggling the key in the lock without success.

How do you get the ignition key out of a jeep?

Access the solenoid: Lift the rubber mat off the tray and remove the two tray screws. You will see the solenoid. It’s a white cylinder with a metal bar protruding rearward toward the shifter. You might opt to remove the center console too. Quick Fix: If you’re in a jam and need to remove the key without disassembling things read on.

What does it mean when your key is stuck in ignition?

Key Stuck In Ignition Fixed! Per my post, dated 01-05-2012, 09:36 PM. I found and fixed the key and start problems. Back in January I was experiencing a problem where I wasn’t able to turn the key to the natural position where the key can be removed from the ignition. This was due to the binding of parts within the shift mechanism.

Where is the solenoid on a Jeep Wrangler?

Modal dependent. Access the solenoid: Lift the rubber mat off the tray and remove the two tray screws. You will see the solenoid. It’s a white cylinder with a metal bar protruding rearward toward the shifter. You might opt to remove the center console too.

Brilliant post, Milo, very useful. I have a 2003 Grand Cherokee Overland 2.7 CRD, which I love, and earlier today the ignition key would not come out of the ignition. My first thought was the ignition lock itself, so I spent some time jiggling the key in the lock without success.

Access the solenoid: Lift the rubber mat off the tray and remove the two tray screws. You will see the solenoid. It’s a white cylinder with a metal bar protruding rearward toward the shifter. You might opt to remove the center console too. Quick Fix: If you’re in a jam and need to remove the key without disassembling things read on.

Key Stuck In Ignition Fixed! Per my post, dated 01-05-2012, 09:36 PM. I found and fixed the key and start problems. Back in January I was experiencing a problem where I wasn’t able to turn the key to the natural position where the key can be removed from the ignition. This was due to the binding of parts within the shift mechanism.

Modal dependent. Access the solenoid: Lift the rubber mat off the tray and remove the two tray screws. You will see the solenoid. It’s a white cylinder with a metal bar protruding rearward toward the shifter. You might opt to remove the center console too.

When do you know your Jeep Cherokee ignition switch is bad?

If your Jeep Cherokee is starting right up, but then immediately dies, that is a very good indication that the ignition switch is bad. Here’s what happens. You aren’t getting power to the ignition or fuel pump while the key “rests” in the run position.

Why is there no key in my Jeep?

Right after we closed the doors they ignition viewer said “NO KEY IN VEHICLE” and disabled the Jeep. Sure enough nothing would work, couldnt unlock the doors from inside, couldnt unlock with remote or even lock with remote. Took the key fob apart to get to the spare key and popped the push button start out and nothing key wouldnt turn.

What happens when your key won’t turn in?

If your key won’t turn your ignition lock cylinder and the steps above did not get your ignition to turn, then there is an extremely good chance your vehicle is in the list below. The list below is just a partial list of vehicles we suspect of having ignition failure problems when people call and say “My key won’t turn in my ignition”.

Why is the ignition key stuck in the steering column?

This was due to the binding of parts within the shift mechanism. Understanding how it works: There is a cable that runs from the gear shifter to the ignition/key in the steering column. This cable prevents the ignition key from being removed unless the shifter is in park.

What to do when your key is stuck in the ignition?

The cap on the solenoid has a hole where a metal bar connects the solenoid to the button linkage. The Problem: The cap on this solenoid had come loose, slid down the metal bar, and was binding between the bar and metal shifter base. The Fix: Just slide the cap back on the solenoid and snap it into place.

The cap on the solenoid has a hole where a metal bar connects the solenoid to the button linkage. The Problem: The cap on this solenoid had come loose, slid down the metal bar, and was binding between the bar and metal shifter base. The Fix: Just slide the cap back on the solenoid and snap it into place.

What causes a Jeep Grand Cherokee to not start?

Jeep Grand Cherokee Won’t Start Diagnosis. 1 1. Battery Cables. While the battery cables are not necessarily the most likely issue to cause your Grand Cherokee to not start, they are some of the 2 2. Battery Charge. 3 3. Starter. 4 2. Ignition Issues. 5 3. Engine Timing.

Why does my Jeep Cherokee not turn on?

Symptoms don’t get more straightforward than this: The truck doesn’t start. Turn the key, and everything comes on, but the driveway is absent of that Jeep rumble. When you turn the key, a number of things happen. First, the key-switch engages the vehicle’s accessory systems like the radio.

How does the ignition work on a Jeep Cherokee?

First, the key-switch engages the vehicle’s accessory systems like the radio. One click further activates the rest of the system, including the engine ignition, gauges and electric fans. Turning it further engages the momentary switch that sends power to the starter and turns the engine over.

Why is my car key not turning in the ignition?

The following three factors may explain why your key is unable to turn in the ignition: Factor 1: Bent key. Bent keys can sometimes enter the ignition cylinder, but once inside will not line up correctly to allow the car to start. If your key looks visually bent, you can use a non-metal hammer to carefully flatten the key down.

Why does my steering wheel not turn when I turn the key?

Turn the Steering Wheel The most common reason that a car key will not turn is that the steering wheel has locked. This will happen when the steering wheel has been moved after the key has been removed from the ignition cylinder. Turn the steering wheel to the right and left.

What happens if you don’t turn the ignition key?

Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler.

How to remove skim key from Jeep Grand Cherokee?

JEEP SKIM KEY PROBLEM… SOLVED!!!! ECM REPROGRAMMED Jeep Grand Cherokee. Remove SKIM from ECM If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why does my Toyota Geo not turn on?

The Toyota and Geo ignitions tend to stop turning because of worn keys. A new “code” key or duplicate key may solve the problem. If a new key does not get your ignition to turn then your ignition will need to be worked on. Vehicles Affected

What to do if your Jeep Cherokee turns off while driving?

Try changing the throttle position sensor located on the throttle body. Pull throttle body off 4 bolts disconnect the 3 wires clean throttle body with throttle body spray or carb spray. Spray the other sensor clean to a shine. My jeep was doing same thing no more problems.

Why does my Jeep Grand Cherokee intermittently start?

Intermittent starting, sometimes takes 20-100 (+) tries to turn key and get it to crank. If I was in a hurry or had a passenger, it seemed to know and would take 5+ minutes turning key before it would crank and start! I joked it gave me ‘car-ple tunnel!’

Is it possible for a Jeep Cherokee to not start?

People will swear it won’t start, but suddenly, it starts right up and drives fine. Other times, it would start normally with first turn of key! My Jeep would sometimes lose power while accelerating. I would pull over, turn key off and restart it and it would drive fine.

JEEP SKIM KEY PROBLEM… SOLVED!!!! ECM REPROGRAMMED Jeep Grand Cherokee. Remove SKIM from ECM If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

When to reset the Immobilizer on a Jeep Grand Cherokee?

The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.

If your key won’t turn your ignition lock cylinder and the steps above did not get your ignition to turn, then there is an extremely good chance your vehicle is in the list below. The list below is just a partial list of vehicles we suspect of having ignition failure problems when people call and say “My key won’t turn in my ignition”.

How can I tell if my Jeep Grand Cherokee is shifting?

Turn ignition key ON and OFF three times, finally leaving the key in the ON position. Leave the Overdrive Off Switch in the normal overdrive (ON) position. Immediately begin counting the number of flashes displayed by the Overdrive Off Switch indicator lamp. There will be two sets of flashes, separated by a pause.

What’s the Flash code on my Jeep Grand Cherokee?

Code 26 – Governor Pressure Sensor Offset Drift Code 55 – End of Message You may or may not be skilled enough to actually fix the problems indicated by the flash codes yourself, but you’re better-armed with an understanding of where the issues lay as you seek help from a mechanic.

Why does my GM ignition key not turn?

Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Category Autos & Vehicles.

Where is the ignition switch on a Jeep Cherokee?

The Cherokee’s ignition switch is not what your key goes into. That is called the lock cylinder. The ignition switch typically sits directly behind the lock cylinder. It has three main functions. Power the Accessories- This should be what you get when you turn the key to the first position.

The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.

Why does my Jeep Grand Cherokee tailgate not open?

Go to the Jeep Grand Cherokee Electrical Problems topic to discuss the battery problem. It is confusing to have separate issues discussed in a single topic and makes it harder for people to find the information they need. i also have a 96 jeep grand cherokee , my tailgate opens very rarely , how did you get yours to open ?

The Toyota and Geo ignitions tend to stop turning because of worn keys. A new “code” key or duplicate key may solve the problem. If a new key does not get your ignition to turn then your ignition will need to be worked on. Vehicles Affected

Why does my 2005 Jeep Grand Cherokee not start?

My 2005 JGC has 25K and when I turn the key it clicks but does nto start. I tried jumping but that does not work and it seem to have plenty of power. I f I sit and turn the key 10 times it might turn over and start.

What to do if your car key won’t turn in?

Ignitions can be extremely fragile. Please do not poke around inside the ignition lock cylinder. A dirty ignition can be fixed by spraying small doses of an electrical cleaner in the ignition then gently sliding the key in and out of the ignition cylinder many times.

What causes a locked steering wheel to not turn in?

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

Why does my Saturn key not turn in?

The Saturn ignitions tend to stop turning because of worn keys and worn ignitions. (mostly worn ignitions) Vehicles Affected The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle.

Why does my car key not turn in?

Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder. Ignitions can be extremely fragile. Please do not poke around inside the ignition lock cylinder.

How do you lock your keys in your car?

Two ways to lock your keys in your car by accident or on purpose. 1. May only pertain to MY 2014 and must have autostart; with the driver door open (or driver door plus other doors open) press autostart button twice then put keys on the front seat and close all doors, DONE! Keys now locked in the car

How to reset keyless remote transmitters in Jeep Grand Cherokee?

Climb into your Jeep Grand Cherokee with your keyless remote(s) in hand and your manual ignition key. Do not close the driver’s door. Hit the “Lock” switch on your driver’s side door and insert the key into the ignition. Turn the key to the “Run” position and aim the keyless remote at the steering wheel.

Two ways to lock your keys in your car by accident or on purpose. 1. May only pertain to MY 2014 and must have autostart; with the driver door open (or driver door plus other doors open) press autostart button twice then put keys on the front seat and close all doors, DONE! Keys now locked in the car

How do I Reset my Jeep Grand Cherokee?

Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010

How to reset Jeep Grand Cherokee Laredo security system?

Notes: If you see an intermittent problem like this, consider getting OEM (original equip. mfg., i.s, jeep) key. You can give your VIN number to the dealer to have one made. Insert your key and turn the drivers side door lock to the right , then left and then right again …this will reset the security system.

What kind of key do I need for my Jeep Laredo?

Use only a Jeep key made by Jeep. It appears the official jeep key enables the security system when you insert it into the ‘key hole’. Notes: If you see an intermittent problem like this, consider getting OEM (original equip. mfg., i.s, jeep) key. You can give your VIN number to the dealer to have one made.

What are the symptoms of a bad ignition lock cylinder?

If the ignition lock cylinder wear out or breaks, it may prevent the vehicle from starting when the key is inserted and turned. 3. Issues inserting and removing the key. Issues with inserting and removing the key are another symptom of a potential problem with the ignition lock cylinder.

What’s the name of the ignition lock cylinder?

The ignition lock cylinder is the cylindrical tumbler and key that is used to power on and start the vehicle. While many newer vehicles are now being manufactured with push button and keyless power and starting systems, traditional ignition lock cylinders are still commonly found on many road…

If the ignition lock cylinder wear out or breaks, it may prevent the vehicle from starting when the key is inserted and turned. 3. Issues inserting and removing the key. Issues with inserting and removing the key are another symptom of a potential problem with the ignition lock cylinder.

The ignition lock cylinder is the cylindrical tumbler and key that is used to power on and start the vehicle. While many newer vehicles are now being manufactured with push button and keyless power and starting systems, traditional ignition lock cylinders are still commonly found on many road…

What happens when you remove the key from the ignition?

Car Engine Doesn’t Turn Off When Removing Key or Pressing STOP It is a strange problem to have a car that won’t turn off when you remove the key from the ignition or press the Engine Stop button. Your engine will continue to run even when you remove the key from the ignition because the fuel pump is not shutting off.

A very common reason a car key won’t turn in the ignition is that the keyway of the ignition cylinder is a little jammed up. Just lubricating the lock may be enough to solve your issue.

What to do if your house key won’t turn in the lock?

If that is the problem, it is easy to fix. You can spray a little dry lubricant in the lock to free up the plug so you can open the door. Spray lubricant in the keyway and insert the key a few times so the lubricant can get worked into the mechanism.

What does it mean when the key won’t come out?

What I mean is you can change the gears without pushing the button on the side of the gear shifter so I didn’t know if this may be the problem since the key won’t cut off or come out if the car is not in park. My car has 999999 miles. My car has an automatic transmission. It is either the ignition switch electrical or the ignition lock cylinder.

When to replace ignition switch on Jeep Grand Cherokee?

While driving 45 mph, the engine seized and shut off. The contact was able to park the vehicle on the side of the road and restart it with no issue. The contact stated she experienced the failure again on July 12, 2019. The vehicle was taken to an independent mechanic who diagnosed that the ignition switch needed to be replaced.

Why does my Jeep not start when I Turn on the ignition?

If your vehicle does not have a check engine light this may not be a problem. It is possible that this is just the sound that the vehicle makes normally. If you’ve owns the vehicle for quite some time and… Engine heat can degrade components such as ignition coils and the crankshaft position sensor. The components will then fail once they are hot.

A very common reason a car key won’t turn in the ignition is that the keyway of the ignition cylinder is a little jammed up. Just lubricating the lock may be enough to solve your issue.

The Cherokee’s ignition switch is not what your key goes into. That is called the lock cylinder. The ignition switch typically sits directly behind the lock cylinder. It has three main functions. Power the Accessories- This should be what you get when you turn the key to the first position.

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

How do you turn off the alarm on a jeep?

Press the power door-lock switch on the keyless entry fob. Close the driver’s side door. Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed.

Why does my Gm key not turn in?

The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle. This is the same for the Chrysler vehicles (Chrysler, Dodge, Eagle, Jeep, Plymouth).

If your Jeep Cherokee is starting right up, but then immediately dies, that is a very good indication that the ignition switch is bad. Here’s what happens. You aren’t getting power to the ignition or fuel pump while the key “rests” in the run position.

Are there any recalls on Jeep Grand Cherokee ignition switches?

1st recall recieved in 2014 about a moth after purchase said the ignition switch was faulty causing loss of power. To date have had the ignition replaced 2x. It stil looses power while in motion from 45mph to 70mph. Have had many repairs done claiming to fix the problem and nothing has worked.

Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010

What to do if your Jeep remote is not working?

1. Remove the battery. 2) Use 1/3 of a sticky note, fold it, and place it within the round battery slot (on the floor beneath where the battery is placed. 3) Put the battery in on the folded note. WALAAA! Thank you so much, this worked for me!!! It simply is a problem with the battery positioning within the fab. 1. Remove the battery.

How to troubleshoot a Jeep no start condition?

No Start Condition Basics. NO START 1: Checking For Spark. NO START 2: Checking For Fuel. NO START 3: Checking Engine Mechanical Condition. Cranks But Does Not Start Summary. More 4.0L Jeep Diagnostic Tutorials.

What to do when your Jeep Grand Cherokee won’t start?

As mentioned, the next time the engine won’t start leave the ignition switch on so the dash lights are on. Step on the brake pedal and shift the transmission into neutral and then try starting the engine. If the engine starts then the problem is with the transmission range switch. Thanks for all the suggestions!

If your vehicle does not have a check engine light this may not be a problem. It is possible that this is just the sound that the vehicle makes normally. If you’ve owns the vehicle for quite some time and… Engine heat can degrade components such as ignition coils and the crankshaft position sensor. The components will then fail once they are hot.

1. Remove the battery. 2) Use 1/3 of a sticky note, fold it, and place it within the round battery slot (on the floor beneath where the battery is placed. 3) Put the battery in on the folded note. WALAAA! Thank you so much, this worked for me!!! It simply is a problem with the battery positioning within the fab. 1. Remove the battery.

Can you unlock a jeep with a key fob?

But if you locked the doors with the key fob or with the button on the door it would activate the alarm. Probably about 15-18 years ago I was at a Jeep dealership and there was a guy asking a salesman how he could use only the valet key to unlock the vehicle without setting the alarm off.

Why is the liftgate on my Jeep not closing?

Stop it from lowering so you can keep it open and at least use it at that less than fully open position and it will switch off and go into manual only mode. It won’t shut by any of the electrical options and you will have to manually shut it then also. All fixed from the dealer…contact issue.

Why is the tailgate not latching on my Jeep?

Went to close it and nothing…tried it from the overhead button, rear button and key fob. Nothing. So I “closed” it manually and it will not latch/secure the tailgate. Tried to put it in reverse, then drive, then park and open/close…and it just stays open! :slapfight: Thoughts?

Stop it from lowering so you can keep it open and at least use it at that less than fully open position and it will switch off and go into manual only mode. It won’t shut by any of the electrical options and you will have to manually shut it then also. All fixed from the dealer…contact issue.

Are there any problems with the Jeep Grand Cherokee?

Other Common Electrical System related problems of Jeep Grand Cherokee Problem Category Number of Problems Electrical System problems 3956 Alternator/generator/regulator problems 369 Ignition Switch problems 289 Car Will Not Start problems 251

Ignitions can be extremely fragile. Please do not poke around inside the ignition lock cylinder. A dirty ignition can be fixed by spraying small doses of an electrical cleaner in the ignition then gently sliding the key in and out of the ignition cylinder many times.

Why is my ignition lock cylinder not working?

The ignition lock cylinder is connected to an electronic ignition switch, they work power on and start the vehicle. If the ignition lock cylinder wear out or breaks, it may prevent the vehicle from starting when the key is inserted and turned. A no start condition can also be caused by a wide variety of other issues,…