Can you take the doors off a Jeep Wrangler sport?
The first step in taking the doors off your Jeep Wrangler is simply rolling down the windows. Gently lift the door straps off their hooks. Remove the door hinge bolt and gently slide the door away from the body. Store doors in a cool, dry place for safekeeping.
How do you take the doors off a Jeep Wrangler?
Roll down the Jeep window. This will be needed for when you live the door off of the hinge. Step Two: Use the hex tool to remove the bolts at the bottom of each door hinge. The bolts are on the bottom side of the hinge. A small pin will be removed that attached to the stud that is attached to the door.
How big of a socket do I need to take off a jeep door?
Use a 13 millimeter socket and wrench to remove these nuts. Use a six point socket rather than a twelve point socket to minimize how much the nut can move inside the socket.
How do you remove wiring from a Jeep Cherokee?
Press the release on the plastic wire pigtail and pull it backward to disconnect the wiring. If your Jeep does not have power windows or door locks, you can skip this step. Be careful not to break the plastic clip that holds the wiring pigtail in place. Locate the two bolts holding the door on the vehicle.
How do you loosen the door nuts on a Jeep Cherokee?
Turn the nuts counter-clockwise to loosen them. Be careful with the paint on the door hardware. The nuts are painted to match the body of the Jeep, so be very careful not to damage the paint as you unscrew them. Damaging the paint will not only stand out, but could lead to rusting.
Roll down the Jeep window. This will be needed for when you live the door off of the hinge. Step Two: Use the hex tool to remove the bolts at the bottom of each door hinge. The bolts are on the bottom side of the hinge. A small pin will be removed that attached to the stud that is attached to the door.
Use a 13 millimeter socket and wrench to remove these nuts. Use a six point socket rather than a twelve point socket to minimize how much the nut can move inside the socket.
Press the release on the plastic wire pigtail and pull it backward to disconnect the wiring. If your Jeep does not have power windows or door locks, you can skip this step. Be careful not to break the plastic clip that holds the wiring pigtail in place. Locate the two bolts holding the door on the vehicle.
Turn the nuts counter-clockwise to loosen them. Be careful with the paint on the door hardware. The nuts are painted to match the body of the Jeep, so be very careful not to damage the paint as you unscrew them. Damaging the paint will not only stand out, but could lead to rusting.