How do you remove doors on a Jeep Wrangler?
Using the Torx 40 bit and ratchet, remove the single bolt holding it against the jamb and move the arm out of the way. Moving to the outside of the door, find the bolts that thread upward from below into each external door hinge and remove them using the Torx 50 head and ratchet.
How do you remove wiring from a Jeep Cherokee?
Press the release on the plastic wire pigtail and pull it backward to disconnect the wiring. If your Jeep does not have power windows or door locks, you can skip this step. Be careful not to break the plastic clip that holds the wiring pigtail in place. Locate the two bolts holding the door on the vehicle.
How do you remove the roof on a Jeep Wrangler?
Removing the front and rear doors—or, on a two-door Wrangler, only the front doors—is much easier than yanking off the roof. Start by locating and removing the interior panels just ahead of each door to reveal the doors’ electrical connectors.
Where is the electrical wiring on a four door Jeep?
Tip: If your Jeep is four-door, the electronic wiring will be located in the B-Pillar of the frame. Warning: To prevent damage, do not pull excessively on the wiring harness. Step 3: Loosen the lock nuts.
How to remove the doors off a Jeep Wrangler?
How to remove the doors off of a Jeep Wrangler. This demonstration is on a 2016 Jeep Wrangler, but can apply to any Jeep Wrangler. How to remove the doors off of a Jeep Wrangler. This demonstration is on a 2016 Jeep Wrangler, but can apply to any Jeep Wrangler. Skip navigation Sign in Search Loading… Close This video is unavailable.
Press the release on the plastic wire pigtail and pull it backward to disconnect the wiring. If your Jeep does not have power windows or door locks, you can skip this step. Be careful not to break the plastic clip that holds the wiring pigtail in place. Locate the two bolts holding the door on the vehicle.
How do you loosen the door nuts on a Jeep Cherokee?
Turn the nuts counter-clockwise to loosen them. Be careful with the paint on the door hardware. The nuts are painted to match the body of the Jeep, so be very careful not to damage the paint as you unscrew them. Damaging the paint will not only stand out, but could lead to rusting.
Where is the fuse box on a Jeep Wrangler?
Locate the interior fuse box. The fuse box in the interior of a Jeep Wrangler is located near the emergency brake. Once you find it, remove the cover over the fuse box by pulling it backward toward yourself. If you have trouble finding the fuse box, refer to your vehicle’s owner’s manual for directions.