What kind of oil does a Jeep Wrangler need?
Pennzoil® is the only motor oil recommended by the Jeep® brand in North America.
What oil does a Jeep YJ use?
YJ Wranglers (1987 – 1995): Engine
| Engine | Quantity | Fluid |
|---|---|---|
| 4.0L | 6 Quarts / 5.7 Liters | 10W-30 or 5W-30 |
| 2.5L | 4 Quarts / 3.8 Liters | 10W-30 or 5W-30 |
| 2.4L | 4 Quarts / 3.8 Liters | 10W-30 or 5W-30 |
What kind of oil does my 1995 Jeep Wrangler take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (Below 16) |
|---|---|
| Capacity: | 6 quarts (with filter)After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
What kind of oil should I put in my Jeep Wrangler?
Just don’t forget to change the oil filter too! The best oil for your jeep Wrangler is clean oil. Irrespective of the type, may it be full synthetic or regular oil. What doesn’t or shouldn’t change is the oil replacement intervals.
What kind of engine does a Jeep Wrangler have?
Off-road enthusiasts and many others find the Jeep Wrangler series enjoyable. Over the years, Jeep has offered the Wrangler with minimal changes in the body and engine. 1987 Wranglers came with a 2.5L four cylinder engine or a 4.2L six-cylinder engine. Changing the oil on the Wrangler takes around 15 minutes to do properly.
What kind of oil does a 4.2L engine use?
The 4.2L engine calls for five quarts — without a filter change, six with a filter change — of a SAE 5w40 oil. The 2.5L uses 4.1 quarts without a filter and five quarts with a filter change of the same weight oil. Higher mileage engines benefit from high-mileage or synthetic oils.
What kind of coolant does a Jeep Wrangler use?
Mishimoto Liquid Chill Performance Coolant also guards against engine wear and corrosion, plus seals pinhole-sized leaks automatically. *Please see product pages for any exceptions.
How much oil does a Jeep Wrangler take?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type 3.8L Engine Oil 6 Quarts / 5.7 Liters 5w-20 3.6L Engine Oil 6 Quarts / 5.6 Liters 5w-20 Brake Fluid Fill to Full Mark DOT 3 Clutch Fluid Fill to Full Mark DOT 3
What kind of fluid does a Jeep Wrangler use?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type Clutch Fluid Fill to Full Mark DOT 3 Power Steering Reservoir Fill to Full Mark ATF 4 3.8L Cooling System 13 Quarts 50/50 Antifreeze/Water Mix 3.6L Cooling System (2013-2018) 10.5 Quarts 50/50 Antifreeze/Water Mix
Off-road enthusiasts and many others find the Jeep Wrangler series enjoyable. Over the years, Jeep has offered the Wrangler with minimal changes in the body and engine. 1987 Wranglers came with a 2.5L four cylinder engine or a 4.2L six-cylinder engine. Changing the oil on the Wrangler takes around 15 minutes to do properly.
What does W mean on a Jeep Wrangler oil rating?
The “w” in the viscosity indicates the oil’s viscosity in winter temperatures. Generally, a faster flowing oil in colder temperatures is desirable because this means more internals get oil at startup faster than a slower flowing oil, reducing wear and tear on your engine. In terms of gear oil, you’ll see ratings like GL-3 and GL-4.